Martin R Posted December 30, 2017 Share Posted December 30, 2017 37 minutes ago, MilesH said: A little birdie told me you might be racing in 2018? Not me Miles. Not enough talent or money. A few of the sprinters are moving into racing though Link to comment Share on other sites More sharing options...
Alex B Posted December 30, 2017 Share Posted December 30, 2017 8 hours ago, Martin R said: Did all my work early this year. I hope Liz does not read this. It involved a service, new Quantum one way. New Nylon bushes as bearings are not allowed in the sprinting. 1 inch ARB and a geo. Its now sitting in the garage waiting for a trackday. It may well be Snetterton depending on the weather Monday 8th Jan at Donington take your fancy Martin? Link to comment Share on other sites More sharing options...
Daveb99 Posted December 30, 2017 Share Posted December 30, 2017 5 hours ago, El-ahrairah said: Trying to fix the moving glass on my Elise. The guides have come away from fixed positions. Need to epoxy a bracket back into place and secure the guides with new bolts/epoxy if need be. Truly hate these jobs. I have sympathy for this, I had to do something similar on the S160 just before I swapped it for the Exige. Lots of swearing and skin lost, absolute sh*tter of a job Link to comment Share on other sites More sharing options...
Phil S1 Posted December 31, 2017 Author Share Posted December 31, 2017 14 hours ago, El-ahrairah said: Trying to fix the moving glass on my Elise. The guides have come away from fixed positions. Need to epoxy a bracket back into place and secure the guides with new bolts/epoxy if need be. Truly hate these jobs. Not a job I ever had the 'pleasure' of thankfully. Good luck with it, hope it doesn't prove too painful! Link to comment Share on other sites More sharing options...
Phil S1 Posted December 31, 2017 Author Share Posted December 31, 2017 21 hours ago, Martin R said: Did all my work early this year. I hope Liz does not read this. It involved a service, new Quantum one way. New Nylon bushes as bearings are not allowed in the sprinting. 1 inch ARB and a geo. Its now sitting in the garage waiting for a trackday. It may well be Snetterton depending on the weather Sounds like there's been some creative accounting going on there Good luck for 2018 Martin Link to comment Share on other sites More sharing options...
John FISH Curtis Posted December 31, 2017 Share Posted December 31, 2017 Mine has been tucked away in garage, under cover and battery on a CTEK. I need to complete the following before spring reaches us. Replace front ARB bushes, fit wash/wiper bar mod, rear spoiler wrapped, front splitter sprayed, leather trim to center console. Then a good detail session. Link to comment Share on other sites More sharing options...
IAN G Posted January 1, 2018 Share Posted January 1, 2018 if you think poorboys wheel seal is good , try planet polish wheel seal and shine , very good esp on black rims great work on the evora too 👍 mines had new engine and gearbox oil both millers nano drive , 2bular in the new year Link to comment Share on other sites More sharing options...
MrWill Posted January 1, 2018 Share Posted January 1, 2018 Made the most of the 10 days I've just had off over Xmas. After the fixing the hard top. I sorted a rattling passenger door with electricians tape on the door striker - Thanks to whichever wise soul recommended that instead of buying a new lock. If only all jobs were as easy and satisfying.Then set about fixing a knocking noise from the driver rear wheel arch. Guessed it could be a worn ball joint so replaced both. Will only find out if it is when I next get out but either way it was a good learning experience...... for the planned suspension refresh which I'm slowly building towards - currently giving new hub carriers and steering arms the three stage POR15 treatment. Oh and made the interior light blue to match the stack unit.A lack of space means march will see me pay a garage to remove front camshell to do: ali radiator / towing strut / new spots / nose badge / remote thermostat kit / ep gearbox mount.... And that will lay the ground for a visit to sabre heads at some point in the next 12 months for kr1 head with some mgtf 135 cams and janspeed small bore 421 manifold. Right, off for the traditional new years day curry. Back to work tomorrow Link to comment Share on other sites More sharing options...
Phil S1 Posted January 2, 2018 Author Share Posted January 2, 2018 On 31/12/2017 at 10:03, John FISH Curtis said: Mine has been tucked away in garage, under cover and battery on a CTEK. I need to complete the following before spring reaches us. Replace front ARB bushes, fit wash/wiper bar mod, rear spoiler wrapped, front splitter sprayed, leather trim to center console. Then a good detail session. Why are you spraying the front splitter FISH, just a refresh or a change of colour? Link to comment Share on other sites More sharing options...
scatty Posted January 3, 2018 Share Posted January 3, 2018 I think mines in the garage. I best check ive not seen it since Gav swapped the gear cables and put some fresh gear box oil in it. Felt like a new car afterwards. as soon as it's a nice ish day I might go for a drive. Quiet Alex... Link to comment Share on other sites More sharing options...
Winners Posted January 3, 2018 Share Posted January 3, 2018 Trying to keep mine running just a little this winter. Last winter it was off road while I re did the interior and then I missed out on many events trying to sort out a misfire it developed while sitting doing nothing. Even missed LITP ☹️ The aim is to just keep it running this year and enjoy...no "improvements" That's massively tempted fate! Link to comment Share on other sites More sharing options...
Alex B Posted January 3, 2018 Share Posted January 3, 2018 1 hour ago, scatty said: I think mines in the garage. I best check ive not seen it since Gav swapped the gear cables and put some fresh gear box oil in it. Felt like a new car afterwards. as soon as it's a nice ish day I might go for a drive. Quiet Alex... Booked that drive in for sometime in July? Link to comment Share on other sites More sharing options...
Phil S1 Posted January 4, 2018 Author Share Posted January 4, 2018 14 hours ago, Winners said: The aim is to just keep it running this year and enjoy...no "improvements" That's massively tempted fate! Lol, really missed your car at LitP last year Mark, let's hope the 'no improvements' plan works out Link to comment Share on other sites More sharing options...
lotus111 Posted January 4, 2018 Share Posted January 4, 2018 Still using my 250, went to the annual Boxing Day raft race in Matlock and it was a nice dry day, so fun still to be had this time of the year Link to comment Share on other sites More sharing options...
kayj_prod Posted January 6, 2018 Share Posted January 6, 2018 I managed a 50 mile run out while I was in the UK- quite grateful for the fact I hit the few days when it was mild and dry! I fitted the battery isolator I posted about a while ago. Looking forward to getting back in the summer to enjoy it properly (and should make LiTP this year)! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.