Alex B Posted July 22, 2014 Share Posted July 22, 2014 Finally arrived. Link to comment Share on other sites More sharing options...
dobbo Posted July 22, 2014 Share Posted July 22, 2014 Chop chop then ;-) Link to comment Share on other sites More sharing options...
Steve J Posted July 22, 2014 Share Posted July 22, 2014 He just threw it on your lawn like that? Was it Yodel? Link to comment Share on other sites More sharing options...
Alex B Posted July 22, 2014 Author Share Posted July 22, 2014 Cars now full stripped. Just gotta pop into work for an hour then the mammoth task of putting it back together... Link to comment Share on other sites More sharing options...
un1eash Posted July 22, 2014 Share Posted July 22, 2014 What time is your bus to chatsworth this weekend? Link to comment Share on other sites More sharing options...
Martin R Posted July 22, 2014 Share Posted July 22, 2014 You are using a chisel to fit them? Taxi to Chatsworth please Link to comment Share on other sites More sharing options...
Alex B Posted July 22, 2014 Author Share Posted July 22, 2014 You are using a chisel to fit them? Taxi to Chatsworth please Haha, nope that was for opening the box as my knife had ran away. There in belts on and timing next. Link to comment Share on other sites More sharing options...
Phil S1 Posted July 22, 2014 Share Posted July 22, 2014 Talk about cutting it fine Alex Link to comment Share on other sites More sharing options...
Alex B Posted July 22, 2014 Author Share Posted July 22, 2014 Talk about cutting it fine Alex Yeah unfortunately I've been mucked around with parts for the past two weeks.Now I'm struggling with timing. Best get the push bike out for Chatsworth. Link to comment Share on other sites More sharing options...
Martin R Posted July 22, 2014 Share Posted July 22, 2014 Chop, chop. You have done the hard bit Link to comment Share on other sites More sharing options...
Alex B Posted July 22, 2014 Author Share Posted July 22, 2014 Chop, chop. You have done the hard bit I've got the new cams timed up via the crank. It all moves as it should no fowling by hand so I Decided I'd give it ago at starting before fine tuning the cam timings it's cranks n tries to fire but also no K series roar. Is I'm thinking either timing it miles out or the map needs some tweaking. The timing up using dti's is quite daunting so thought I'd leave it for tomorrow afternoon when I'm more awake. Link to comment Share on other sites More sharing options...
Martin R Posted July 22, 2014 Share Posted July 22, 2014 Welcome to my world. I presume you have fitted the Emerald at the same time? The new ones will allow you to keep the IACV. Try putting your foot down on the accelerator slightly when trying to start. If it then runs the IACV probably wants setting up in the Emerald. Also make sure the immobiliser is disabled in the programme. Good luck. Link to comment Share on other sites More sharing options...
scatty Posted July 22, 2014 Share Posted July 22, 2014 Shall I pop round and give you a hand.... Link to comment Share on other sites More sharing options...
Meister Posted July 22, 2014 Share Posted July 22, 2014 Shall I pop round and give you a hand.... Yeah go on Scatty... get your torque wrench and hammer and show the lad how it's done!!LOL!! Link to comment Share on other sites More sharing options...
scatty Posted July 22, 2014 Share Posted July 22, 2014 Damn, I don't own a hammer......:-( Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.