STRaNGe BReW Posted June 7, 2019 Share Posted June 7, 2019 Hi Today I have removed the rear diffuser on my Lotus elise (S3) and took it to be powder coated. I need to source some of the rubber trim that is fixed to the outer edges. Can someone please point me in the right direction. Cheers Andy Link to comment Share on other sites More sharing options...
M@r]{ Posted June 7, 2019 Share Posted June 7, 2019 Try Simon at http://www.scottrussellsportscars.co.uk/ He seems to be able to get hold of most stuff Link to comment Share on other sites More sharing options...
Steve J Posted June 7, 2019 Share Posted June 7, 2019 Any automotive edge trim supplier should be able to provide. Edgetrims.co.uk for example. Link to comment Share on other sites More sharing options...
STRaNGe BReW Posted June 7, 2019 Author Share Posted June 7, 2019 17 minutes ago, Steve J said: Any automotive edge trim supplier should be able to provide. Edgetrims.co.uk for example. Its nothing special then........... should be nice and cheap hopefully. Diffuser is costing me £40.00 should have it back by wednesday so i will get ordering cheers Andy Link to comment Share on other sites More sharing options...
Kevin Posted June 7, 2019 Share Posted June 7, 2019 Andy Eliseparts also sell diffuse edging strip Link to comment Share on other sites More sharing options...
kieranexige Posted June 7, 2019 Share Posted June 7, 2019 Eliseparts as above... Make sure you order the right quantity as its per m. Link to comment Share on other sites More sharing options...
STRaNGe BReW Posted June 11, 2019 Author Share Posted June 11, 2019 Hi Thanks for the info....much appreciated. I will need some sort of adesive to fix the rubber on with .....what would be the best stuff to go with? Andy Link to comment Share on other sites More sharing options...
winthattt Posted June 11, 2019 Share Posted June 11, 2019 I used superglue, as that was what I had in the workshop. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.