Midlands Lotus Owners Club (MLOC)

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more!

This message will be removed once you have signed in.

Archived

This topic is now archived and is closed to further replies.

stockhome

Oz Centre Caps

12 posts in this topic

Quick note for anyone with oz racing wheel centre caps. As you may or may not know they are nearly £80 for a set of four. I got some blank caps from ebay and manged to find a guy in Portugal that does really good aluminium stickers.

 

Total cost about £25

 

http://i51.photobucket.com/albums/f383/stockhome1/20140221_092142.jpg

0

Share this post


Link to post
Share on other sites

Thanks Sheldon.

 

Mine are ok at the moment ( & glued in ) but you never know !

0

Share this post


Link to post
Share on other sites

Can he do standard S1 sizes to mate?

The guys name on ebay is enjoyhappycars he has said he can do the stickers in any size so as long as you can get blank Center caps you are laughing

 

I've just lost another one today. Third one so far since replacing them all - pretty much every time I drive it I lose one :angry:

Leigh these are by far the best stickers I have seen. I have got them in 62mm and shaved the lip from the center cap it means they sit flush with the wheel I will take some photos later

0

Share this post


Link to post
Share on other sites

I had my sticker done in 62mm and they don't seem to stick very well because of the lip. 62mm seems to be too big. I got some 60 (or 59, can't remember to be honest) and they work better. As each of the 62mm ones drops off I replace it with a smaller one. They seem to be OK so far.....

 

I reckon today's was probably the last of the 62mm so when I replace it with a smaller one that might be the end of me loosing them rolleyes.gif

0

Share this post


Link to post
Share on other sites

Here is the link if you contact him he can do other sizes

 

http://www.ebay.co.uk/itm/171223944520?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

I had my sticker done in 62mm and they don't seem to stick very well because of the lip. 62mm seems to be too big. I got some 60 (or 59, can't remember to be honest) and they work better. As each of the 62mm ones drops off I replace it with a smaller one. They seem to be OK so far.....

 

I reckon today's was probably the last of the 62mm so when I replace it with a smaller one that might be the end of me loosing them :rolleyes:

Leigh have you stickers fallen off or the centre caps dropped out? I have stuck the stickers down with araldite

0

Share this post


Link to post
Share on other sites

Stickers fall out, centre caps are pretty solid tbh.

 

I think it's down to the size. Once I went a bit smaller they seem to stick in OK.

0

Share this post


Link to post
Share on other sites

What about the centre caps? I have some Compomotive wheels and require the centre caps, but i am struggling to find any that will fit.

0

Share this post


Link to post
Share on other sites