Big Power For The Lego Brick!

[Dave Hardwick Engineering]

 

Subframe now in place.

 

 

The timing wheel on the crank and failed bolts that fasten it to the crank. A new toothed wheel and fasteners were used.

 

 

 

Wishbones etc shot blasted and ready for painting

 

Standard engine loom removed, I made a new custom loom that plugs into the OE loom.

 

 

I also moved the relays and fuses from the boot into the cockpit to facilitate removal of the rear clam in future.

Also shown is the Adaptronic standalone ECU

 

 

 

 

I made a swirl pot to feed the high pressure pump (Bosch 044)

 

I fitted a Quaife ATB Diff to the box to aid traction.

 

 

Suspension refitted having been refurbished.

 

 

Dave

[stockhome]

Looking good Dave, Simon lives just round the corner used to see the car all the time glad it's being completed

[jonnyfox]

Certainly does look good Dave, well done. I catch up with Simon from time to time too. Post up more pics mate as when you get time ;-)

[DJWilma]

Just had a good look at the power curves and its pretty much the same as my T series with the same GTX2867 so i am happy

 

402bhp at 23psi

 

But i also have the flat power curve from 6k to 7k

 

Very happy with my turbo spools quick ish, but does come on strong at 3000 - 3500 rpm