Steve J Posted March 22, 2005 Posted March 22, 2005 Following on from discussions on the Donnington thread..... Looks like we may have a couple of MLOC guys (Nick Gee and Martin R) that can make nylatron bushes for the gear linkage. It's been said that the Eliseparts linkage upgrade kit is good but the only real benefit comes from replacing the standard rubber bushes with harder nylatron ones. So what does everyone reckon if we can get some made, would you be interested?
Sonya Posted March 22, 2005 Posted March 22, 2005 Me too. Got the short shifter on mine, but wasn't convinced gear linkages needed doing too. The (gear)box on mine is really tight, but would like to see what effect new bushes has. Guess we'll likely be doing a double order too!
shortname Posted March 22, 2005 Posted March 22, 2005 Count me in. I did linkage and quickshifter at the same time on my s160 so didn't know what the individual contribution was. Fairly convinced that the linkage ie bushes were the biggest effect.
Martin R Posted March 23, 2005 Posted March 23, 2005 As it happens ive recently bought and changed my S1 gear linkage for the eliseparts one and its a vast improvment. Im in agreement that its the bushes and not the linkage that is the reason for the improvment. If Nick can source the Nylatron bar, i can get the machining done. Now, if its only a few sets, i can get it done at work for free ( i work in an engineering firm ) If it turns into a largish demand i have a couple of friends who have an independent toolroom who will do it at the right price. I cant take the piss at work as you can understand. It depends if Nick can get the Nylatron at the right price really ? If anyone buys the eliseparts kit in the near future and lets me get a few measurements, we may be in buisness. Im not going to crawl under the beast and take mine off again to measure them.
JEST0R Posted March 23, 2005 Posted March 23, 2005 I have the gear kit what I have'nt put on yet if someone wants to barrow my bushes to get measurements I can post them
GCCK Posted March 23, 2005 Posted March 23, 2005 Sounds like lesstatt & jestor both have some Nylatron bushes that could be measured. Do either of you have access to a micrometer or other such precision measuring device, so that accurate measurements can be passed on to those fabricating replicas?
SpoonZ Posted March 23, 2005 Posted March 23, 2005 maybe organise some kind of group buy on the quick shifter at the same time for those who havent got it? May as well kill two birds etc. Or am I barking up the wrong tree? (too many animals)
Steve J Posted March 23, 2005 Author Posted March 23, 2005 Well if you can get a quickshifter (similar to, but obviously not the same as the Eliseparts one) then I'm sure there would be takers for a bulk buy.
Martin R Posted March 23, 2005 Posted March 23, 2005 Jestor i will PM you my address. If you post the bushes i will measure them and send them straight back. Ta.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.