S1 Rear Brake Discs. What Are You Using...

[Steve J]

Geary is normally very helpful.

Have you looked at Seriously Lotus?

[jonnyfox]

Dave doesn't do bells for the rear of the S1.

[Steve J]

Yvo then?

[jonnyfox]

I have just put these on all round on the S1, Not had chance to use in anger yet thou

Andy I suppose I could just use the EP ones currently on the front, on the back?

 

AP's for the front then :-)

[@ndy]

Andy I suppose I could just use the EP ones currently on the front, on the back?

 

AP's for the front then :-)

I don't see what not.... There are the same

[Alex B]

Andy I suppose I could just use the EP ones currently on the front, on the back?

 

AP's for the front then :-)

That's my current set up.

Larger AP front ally bells

Standard size EP rear ally bells

[jonnyfox]

Caliper spacers on the front Alex?

[Alex B]

Not sure I can check but doubt I'll get chance to do so until tomorrow as I'm on call tonight.

Pretty sure my paper work says they are 295mm discs

[Steve J]

295 on the front will need caliper spacers.

[Alex B]

Then I must be running spacers as paper work for the discs says 295.

[Steve J]

Can't remember the size exactly but mine are about 1.5cm