Midlands Lotus Owners Club (MLOC)

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more!

This message will be removed once you have signed in.

Archived

This topic is now archived and is closed to further replies.

Alex B

Piper 1320 Grind

8 posts in this topic

does anyone have an info on piper's 1320 grind cams?
after duration etc.
also any fettling required for fitting to a vvc head? (they are vvc solid cams)

0

Share this post


Link to post
Share on other sites

Alex, 1320 cams 268 degrees and 10.9mm lift. AFAIK no fettling required. I think you only need the fettling on 1444.

0

Share this post


Link to post
Share on other sites

Alex, 1320 cams 268 degrees and 10.9mm lift. AFAIK no fettling required. I think you only need the fettling on 1444.

cheers for the info as always martin :)

 

i couldn't remember if it was 10.5 or 11mm lift that you can get away with without some small alterations to the head.

0

Share this post


Link to post
Share on other sites

Email DVA to be sure. Also make sure you have the correct springs. I have no idea if you need uprated ones?

0

Share this post


Link to post
Share on other sites

yeah will give dave a buzz in the morning, theres a set of unused ones on ebay.
hence looking into whats needed to to fit em.

0

Share this post


Link to post
Share on other sites

careful, the ITB kit desire will become very strong... Several people started with simple solid cam conversion and ended with tune VHPD type engine...

0

Share this post


Link to post
Share on other sites