massakk Posted November 29, 2017 Share Posted November 29, 2017 Hi all!! big amounts of help here ladies and gents, okay i have a soft top lotus Elise s2..rover series 2002 reg. now when I purchased my car I notice that the rear plastic fastener which hold the roof on one side into place, has snapped from its base which is attached to the inside at the corner of the canvass roof part. Now I'm really wanting if possible to attach this plastic clip back into its mounting, so can anyone advise me as to what would be the best epoxy glue to sue. I know that obvious this item is subject to quite a bit of force as it slides into the fitting on the car and then you have to pull a leaver to secure that side of the canvass roof to the car, but I really want to give it go if possible, and so if anyone can help, it be greatly appreciated, many thanks karim Link to comment Share on other sites More sharing options...
the ref Posted December 1, 2017 Share Posted December 1, 2017 photo will help please Link to comment Share on other sites More sharing options...
dobbo Posted December 1, 2017 Share Posted December 1, 2017 If you can have a look at Deroure and tell us which bit, people might have done a similar repair ??? https://www.deroure.com/diagrams.asp?TBL=1342&MAK=1&MDL=14&SMA=0&SMO=0&ST=&SC=0 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.