|
|
Lotus in the Peak |
| 28th - 30th June 2024 |
Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more!
This message will be removed once you have signed in.
By Mark H
By Mark H •
The Lotus ART GP3 drivers had a difficult qualifying session. Gaps are once again very small between all drivers and position can easily be lost. James Calado will be the best placed Lotus ART driver as he will start 9th. He will be followed by teammate Valtteri Bottas who will be 11th. Pedro Nunes will start from the 17th spot of the grid.
Dark clouds are there, if the rain comes, the race will be full of action.
Finally got a test drive today and have pulled the trigger on this….. Slightly different from my Elise (which goes in a week). Can’t wait!!
The Lotus name and detailing on my engine cover is in need of some new silver paint. The cover is plastic and gets hot, so what paint is suitable for this part? Thanks for any advice.
So my plastic trim was starting to look a bit weathered. I know the back to black stuff works to a degree, but the Auto Glym Bumper and Trim gel is super. Did the front, side and rear grilles. AND the headlight edges were looking poor and aged. Thought I may have to re paint, costs a fortune to get them done properly, but the Auto Glym made them look fabulous! Barely see the worst of it now...... Well pleased with the results..... P.S drag and drop make the images download, dont
Ok, so my 2006 S2 has no handbrake cover. Looks like that's how most come out of the factory. Gear shift has the standard perforated leather. Im looking at the option of getting a HB cover, preferably to match the gear leaver cover, looking to keep it as OEM as possible. What have other owners done with their handbrakes? Aftermarket to match? Or a set to swap out for a new look? Nearly all I have seen go over the top and outside. Any neat ones that tuck inside the HB slot? Show u
And so the winter refresh of my S1 Elise started today. Hoping to take front clam of tomorrow. However of the 4 lower bolts that hold the lower rear to the chassis, 2 are spinning and 2 won't budge despite copious amounts of penetrative oil over the last few months. The Eagle eyed will spot my Dremel tool which I'm not looking forward to using to remove 4 bolt heads that have limited access. Currently on my list are replacing the driving lights brackets, shot blast and paint the tow post, n
By billy 5641
11 days and 2 hours
NO VALUE SPECIFIED
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use
Recommended Comments
There are no comments to display.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.