Lotus Sport Exige Gt3

LOTUS SPORT EXIGE GT3

TECHNICAL SPECIFICATIONS

ENGINE

1.8 2ZZ-GE engine. supercharged and

intercooled, chain driven double overhead

camshafts (DOHC) exploiting

a Variable Valve Timing & Lift - intelligent

(VVTL-i) system, Lotus T4e engine

management system, multi-point sequential

fuel injection, electronic ignition and

electronic throttle control, Lotus Sport dry

sump system with Laminova oil cooler

and, Goodridge braided hoses

EMISSIONS

Bespoke Lotus Sport tuned exhaust

system with Motorsport homologated

catalytic converter

TRANSMISSION

Hewland PCT sequential transmission, 6-

speed, with a selection of ratios available

and a limited slip differential,

Motorsport twin plate clutch and clutch

cover, switchable traction control

Chassis Lotus designed lightweight

structure of epoxy bonded aluminium

alloy extrusions, 6-point roll-cage (FIA

approved)

SUSPENSION

Fully independent race suspension utilising

unequal length wishbones all fully

spherical bearing joints, Öhlins 3

way adjustable (high speed and low

speed bump and rebound) damper with

remote gas reservoir and adjustable

ride height, adjustable front and rear

anti-roll bar and rear double shear track

control arm brace

Wheels Lotus Sport 5-spoke lightweight

forged alloy wheels, FR: 7Jx16 & RR:

8Jx17

BRAKES

Lotus/AP-Racing 4 pot fixed aluminium

alloy front brake calipers, 2 pot rear calipers,

315 mm diameter, uprated

brake pads, stainless steel braided hoses

throughout and 5 position bias valve,

synthetic racing brake fluid

BODYWORK

Carbon fibre front clamshell, rear clamshell,

roof, access panels and engine

cover, revised roof scoop for

increased intercooler efficiency, race front

splitter and larger adjustable carbon fibre

rear wing

ELECTRICAL SYSTEMS

Bespoke Raychem race wiring loom,

steering wheel mounted controls for pit

lane speed, radio, traction control

and data-management system

SAFETY / INTERIOR

6-point HANS approved safety harnesses,

6-point roll-cage (FIA approved). FIA

approved ignition kill switch

(cockpit and external switch location),

electrical fire extinguisher system (cockpit

and external switch location),

removable steering wheel

FUEL SYSTEM

74L FIA approved bag tank with quick fill

system, 4 internal lift pumps feeding 1

external high presure fuel pump,

braided hoses throughout

PERFORMANCE DATA

Engine installation Transverse, midmounted

Cylinder configuration In-line 4

Capacity 1796 cm3

Bore / Stroke 82.0 mm / 85.0 mm

Valve arrangement 4 per cylinder

Compression ratio 11.5 :1

Fuel tank capacity 74L

Gear ratios

I / II / III Choice of ratios available

IV / V / VI Choice of ratios available

R / Final drive Choice of ratios available

Max Power 213 kW ( 289 PS ) at 7800

min-1

Max Torque 284 Nm ( 29 kgm ) at 6500

min-1

Vehicle mass - unladen¹ 750 Kg

DIMENSIONS

Wheelbase 2300 mm

Track FR: 1457 mm & RR: 1506 mm

Overall length 3877 mm

Overall width (door mirrors excluded)

1727 mm

Overall width (door mirrors included)

1910 mm

Ride Height - midladen² 90 mm

NOTES

1- Unladen: vehicle in running order, no

fuel, no occupant

2- Midladen: vehicle in running order, 1/2

tank fuel, 1 occupant

3 - Provisional specification subject to

change