Lotus Engineering Demonstrates The Lightweight Future Of The Passenger

• Study by Lotus Engineering concludes that a vehicle mass improvement of 38% versus a conventional mainstream vehicle can be achieved at only 3% cost. • Efficient design and lightweight materials significantly reduce CO2 emissions.

Lotus Engineering has conducted a study to develop a commercially viable mass reduction strategy for mainstream passenger vehicles. This study, released by the International Council on Clean Transportation, focused on the use of lightweight materials and efficient design and demonstrated substantial mass savings. When compared with a benchmark Toyota Venza crossover utility vehicle, a 38% reduction in vehicle mass, excluding powertrain, can be achieved for only a 3% increase in component costs using engineering techniques and technologies viable for mainstream production programmes by 2020. The 2020 vehicle architecture utilises a mix of stronger and lighter weight materials, a high degree of component integration and advanced joining and assembly methodologies.

Based on U.S. Department of Energy estimates, a total vehicle mass reduction of 33% including powertrain, as demonstrated on the 2020 passenger car model, results in a 23% reduction in fuel consumption. This study highlights how automotive manufacturers can adopt the Lotus philosophy of performance through light weight.

Dr Robert Hentschel, Director of Lotus Engineering said: "Lighter vehicles are cleaner and more efficient. That philosophy has always been core to Lotus' approach to vehicle engineering and is now more relevant than ever. Lightweight Architectures and Efficient Performance are just two of our core competencies and we are delighted to have completed this study with input from the National Highway Traffic Safety Administration and the U.S. Environmental Protection Agency to provide direction for future CO2 reductions. We believe that this approach will be commonplace in the industry for the future design of vehicles."

The study investigated scenarios for two distinct vehicle architectures appropriate for production in 2017 and 2020. The near-term scenario is based on applying industry leading mass reducing technologies, improved materials and component integration and would be assembled using existing facilities. The mass reduction for this nearer term vehicle, excluding powertrain, is 21% with an estimated cost saving of 2%.

A benchmark Toyota Venza was disassembled, analysed and weighed to develop a bill of materials and understand component masses. In developing the two low mass concepts, Lotus Engineering employed a total vehicle mass reduction strategy utilising efficient design, component integration, materials selection, manufacturing and assembly. All key interior and exterior dimensions and volumes were retained for both models and the vehicles were packaged to accommodate key safety and structural dimensional and quality targets. The new vehicles retain the vision, sight line, comfort and occupant package of the benchmarked Toyota Venza.

Darren Somerset, Chief Executive Officer of Lotus Engineering Incorporated, Lotus' North American engineering division which led the study, said "A highly efficient total vehicle system level architecture was achieved by developing well integrated sub-systems and components, innovative use of materials and process and the application of advanced analytical techniques. Lotus Engineering is at the forefront of the automotive industry's drive for the reduction in CO2 and other greenhouse gas emissions and this study showcases Lotus Engineering's expertise and outlines a clear roadmap to cost effective mass efficient vehicle technologies."

Mass and Cost Summary

Base Toyota Venza

excluding powertrain Lotus Engineering Design

System Weight

(kg) 2020 Venza 2017 Venza

% Mass Reduction % Cost Factor % Mass Reduction % Cost Factor

Body 383 42% 135% 15% 98%

Closures/Fenders 143 41% 76% 25% 102%

Bumpers 18.0 11% 103% 11% 103%

Thermal 9.25 0% 100% 0% 100%

Electrical 23.6 36% 96% 29% 95%

Interior 252 39% 96% 27% 97%

Lighting 9.90 0% 100% 0% 100%

Suspension/Chassis 379 43% 95% 26% 100%

Glazing 43.7 0% 100% 0% 100%

Misc. 30.1 24% 99% 24% 99%

Totals 1290 38% 103% 21% 98%

The full report, entitled 'An Assessment of Mass Reduction Opportunities for a 2017 – 2020 Model Year Vehicle Program' can be found at the following link:

http://www.theicct.org/documents/0000/1430..._final_2010.pdf

Photos here:

http://www.midlandslotus.co.uk/forum/index...=sc&cat=206