Elise Series 3 1.6 - Rear Caliper Dust Seals

[X1022x]

Hi everyone

 

I need to replace just the dust seals on the rear Brembo calipers on my S3 Elise.

 

It seems a full strip down is to be avoided, so can I get the seal in without removing the piston?

 

If the piston needs to be removed, a simple case of unwinding then levering out, without disturbing the parts that shouldn’t be touched!?

 

Much appreciated!

[Lithopsian]

Not so simple, unfortunately.  See:

https://wiki.seloc.org/a/How_to_Rebuild_a_Brembo_Caliper

[X1022x]

Ah, thanks!

I'm hoping I can fit the dust seals without disturbing much? Can I get them in place without removing the pistons?