Caligarinet Posted November 21, 2019 Share Posted November 21, 2019 Just fitted a Bosch AR24U wiper blade as recommended on various sites. It’s not clearing the screen in the centre of the blade, googling found someone else with similar issue, but not found a solution. Any recommendations? Link to comment Share on other sites More sharing options...
Caligarinet Posted November 21, 2019 Author Share Posted November 21, 2019 Seems I may need a different wiper arm, part number A117MO105F anyone done this swap? Well seems I already have the updated arm as it’s a u-shaped hook design and the AR24U fits but just doesn’t clear the screen. Link to comment Share on other sites More sharing options...
Jonathan E Posted November 23, 2019 Share Posted November 23, 2019 Have you tried giving the arm a gentle bend towards/away from the screen? I had the same thing some years ago and a slight tweak to the arm solved the problem, trouble is I can’t remember which way I went with it🙄 Link to comment Share on other sites More sharing options...
Meister Posted November 23, 2019 Share Posted November 23, 2019 2 hours ago, Jonathan E said: Have you tried giving the arm a gentle bend towards/away from the screen? I had the same thing some years ago and a slight tweak to the arm solved the problem, trouble is I can’t remember which way I went with it🙄 I did the same, it worked, but can’t remember which way either! There is a post on Seloc explaining which way, which is where I educated myself! Link to comment Share on other sites More sharing options...
Caligarinet Posted November 24, 2019 Author Share Posted November 24, 2019 I did think about trying to bend the arm. Ended up exchanging it for a traditional sprung blade that is doing the job. Bosch SP24S Thanks for advice. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.