rocketian Posted February 14, 2013 Posted February 14, 2013 After being rammed up the back in November I have finally got the Elise back yesterday - it took just over 3 months and that was with the other driver accepting liability ! So new rear clam, heat shield, diffuser etc looks the dogs b******ks - and it is as clean as it has ever been since I bought it 30,000 miles ago ! It was so pleased to be home it woke me up twice in the night with the alarm to let me know - neighbours were pleased too. This has been happening since the shunt, anyone know how to turn down the sensitivity of the alarm ?????
darryl Posted February 15, 2013 Posted February 15, 2013 According to the manual; press button (normally) to set alarm and then press again within two seconds to de-activate the movement sensor, you will hear single beep to confirm! Next time you reset alarm sensor is automatically reactivated. HTH
chris_h Posted February 15, 2013 Posted February 15, 2013 If you have had a new rear clam it could be the boot opening sensor/switch. Maybe a loose connector, or not being pushed down quite enough. I had an ocassional activation and it turned out to the be a front access panel switch. Seem to remember that the number of flashes after turning the alarm off tells you what the activation was ? or is that of my other cars?? Haven't got my manual to hand to check.
rocketian Posted February 15, 2013 Author Posted February 15, 2013 According to the manual; press button (normally) to set alarm and then press again within two seconds to de-activate the movement sensor, you will hear single beep to confirm! Next time you reset alarm sensor is automatically reactivated. HTH Just tried that and all it does is unlock the doors again. If I lock the doors with the key, not the C/L the alarm does not set, but the immobiliser is still on - so that is what I am doing for now
Recommended Posts
Archived
This topic is now archived and is closed to further replies.