Paul martin Posted January 29, 2016 Share Posted January 29, 2016 Hi, just fitted my new bottom brace/ tow point on my S2 . Getting ready for the sprint and hill climb season. Link to comment Share on other sites More sharing options...
KurtB Posted February 1, 2016 Share Posted February 1, 2016 Thats a nice looking bit of kit Paul. Wheres it from? Is the ring the right size (60mm)? Link to comment Share on other sites More sharing options...
Paul martin Posted February 1, 2016 Author Share Posted February 1, 2016 Hi kurt. The D ring is 50 mm. I made it as I'm a stainless steel frabricator. I make stainless steel digging tool for metal detecting. I'm going to start to sell them on eBay soon. I have 10 in fab now. They going to be about £55 delivered. Link to comment Share on other sites More sharing options...
Alex B Posted February 1, 2016 Share Posted February 1, 2016 Looks good! A word of warning, if you post about selling them on Seloc expect the keyboard warriors to come out in. Full force. Link to comment Share on other sites More sharing options...
Reg Posted February 1, 2016 Share Posted February 1, 2016 Kurt's correct the ring needs to be 60mm for the MSA(?) Thats how big mine were when I made them. Link to comment Share on other sites More sharing options...
Paul martin Posted February 1, 2016 Author Share Posted February 1, 2016 Ok,I'll watch that. Only need to sell 9 as I had to buy 6 m of the oval tube lol I'll list them in classified if I do want to sell here. At 50 mm it will be fine for hill climbs and sprints. It only door to door racing they tend to pull up on the size of things. As you can use the std car one on the hill. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.