AL G Posted October 17, 2005 Share Posted October 17, 2005 My car has JUST scraped through the MOT today, front numberplate isn't 90 degrees (It's velcro'd to the clam - no plinth), and the emissions are very borderline . . I re-fitted the CAT yesterday, but loads of metal was falling out of it, kind of like metal filings? Could I have damaged it? It's been all over the place in my boot, and more recently to quickfit to get the studs pressed out . . It's coming back off at the weekend anyway - just wondered thats all Link to comment Share on other sites More sharing options...
Steve J Posted October 17, 2005 Share Posted October 17, 2005 Sounds like it's buggered. Cannot repair but have seen second hand ones on Ebay for less than £100. Link to comment Share on other sites More sharing options...
Mr_Belowski Posted October 17, 2005 Share Posted October 17, 2005 Mine fell to bits inside when it was still attached while I was hooning around on Snake Pass. It spat its contents into the silencer and buggered it right up. For the sake of 100 quid (or 200 for a new one) I'd just replace it. My failure ended up costing £800 parts n labour Link to comment Share on other sites More sharing options...
AL G Posted October 17, 2005 Author Share Posted October 17, 2005 cheers - , i didn't think about the loose bits flying into the Janspeed back box.. CAT by-pass pipe needs to go back on tonight !!! Will check EBAY for next MOT - cheers for th reply Link to comment Share on other sites More sharing options...
Chombers Posted October 17, 2005 Share Posted October 17, 2005 If you’re in no hurry to get one you should be able to find one pretty cheap on ebay, I paid £50 for mine a few months ago. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.