paulb Posted May 25, 2004 Share Posted May 25, 2004 My drivers window has decided to part with the mechanism. The three clip's that look like they are glued to the glass have parted company. Any advise on how to go about re-fitting the glass, and what type of glue would i need. If it's a bit of a pig to do myself any idea of cost, and best place to take it. I'am in Stoke so would normaly go to Christopher Neil. Many thanks Paul Link to comment Share on other sites More sharing options...
Scott_Mac Posted May 25, 2004 Share Posted May 25, 2004 Not sure on the glue front, but click here for the relevant pages from the service manual on the glass etc... Hope it helps! If you want to take it to a dealer, Nick Whale in Brum gets my vote. Link to comment Share on other sites More sharing options...
Simon Posted May 27, 2004 Share Posted May 27, 2004 I had the same problem recently. I brought some 2 part glue from B&Q and sorted it relatively easily. Link to comment Share on other sites More sharing options...
paulb Posted May 27, 2004 Author Share Posted May 27, 2004 Thanks Scott they should help with setting it up as that window has always been tight. I will give that a go Simon, Did yours line up Easily. Link to comment Share on other sites More sharing options...
Simon Posted May 28, 2004 Share Posted May 28, 2004 My window line up easily but it is a good idea to do it with the roof up. Link to comment Share on other sites More sharing options...
GCCK Posted May 28, 2004 Share Posted May 28, 2004 It's not a trivial undertaking. Very fiddly. There's a good online guide to rebonding the windows HERE Graeme Link to comment Share on other sites More sharing options...
paulb Posted May 28, 2004 Author Share Posted May 28, 2004 Thanks Graeme. Glues on order. just going slow over yhe bumps for now or the window comes down. Air con in a S1. I'll have full carpets next. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.