Dr H Posted July 28, 2011 Posted July 28, 2011 Gav at Unit 4 in Burton On Trent serviced my S2 this week -and he was top notch as ever. He actually noticed something t had been missed on 5previous services at very well known specialists - mainly that the oil filterwas the wrong size and probably less than 1 mm of the seal was making contactwith the filter mount (remote housing on my car). Just lucky it never sprang a terminal leak! He also remedieda few small niggles that I didn't even realise was there as well as installingmy take-off plate for oil pressure and temp and running the wires down theouter sill and up into the dash, ready for me to fit the gauge this weekend -hopefully. Thoroughly recommend Unit 4, friendly, good prices andincredible knowledge of these cars.
surrealillusions Posted July 28, 2011 Posted July 28, 2011 Is that the supercharged honda'd S2 I saw there earlier this week?
stockhome Posted July 28, 2011 Posted July 28, 2011 You will have to post up so pics of the install leigh i have all the bits just need to get someone to extend the hazard warning button to the center console might be worth giving unit4 a ring sutton is onlt 30mins fom burton on the a38 Do you have his contact details
Dr H Posted July 28, 2011 Author Posted July 28, 2011 Is that the supercharged honda'd S2 I saw there earlier this week? Yup! Was yours the Silver S1? You will have to post up so pics of the install leigh i have all the bits just need to get someone to extend the hazard warning button to the center console might be worth giving unit4 a ring sutton is onlt 30mins fom burton on the a38 Do you have his contact details Contact details here: http://www.unit4vehicleservices.co.uk/ I've not tackled the hazard switch yet. Sure Gav would do it you asked him. I just asked him to run the wires from the sandwich plate into the cabin. I'll take some pics when I fit the gauge and if I re-wire the hazard light too.
surrealillusions Posted July 28, 2011 Posted July 28, 2011 Yup! Was yours the Silver S1? Yep, getting its head gasket fixed.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.