Jump to content

litp.jpg

Lotus in the Peak
26th - 28th June 2026
S2 Elise 111R
By tstendall, 17/03/09
  • 3,524 views
  1. Sector 111 "re-ENFORCER"  

    This cures a problem which is quite difficult to explain, but anyone who has a elise 111R will probably know what I mean. The 6-speed shift in the 111R is a little bit loose feeling when shifting as if when you are moving the gear stick you're also mo · 02/06/10

  2. Stainless Steel toe eye mount  

    I only had this done because the front clam was coming off to have the heater fan failure fixed.<br /><br />I've heard that the stock item gets terribly corroded so this was another pre-emptive fix. · 02/06/10

  3. HID dipped headlights  

    Let there be light!<br /><br />Anyone who has driven an elise on a dark rainy evening will know that you can't see much further than the end of the front clam - this makes it better.<br /><br />One word of caution though - the HID ballast boxes du · 02/06/10

  4. Sector 111 "HNTpad"  

    Good, but expensive for what it is, mainly due to the fact that the only supplier is based in the US.<br /><br />The pedals in the toyota engined elise upto 05MY are pretty poorly spaced for heel and toe - the brake pedal sinks too low and is too far from · 02/06/10

  5. Sector 111 "LIDbone"  

    This is clever, albeit expensive to source as the company who supply it only operate in the US.<br /><br />If you've ever tried to put some luggage in the boot with something in one of your hands, you'll be familiar with the routine: Open boot, li · 02/06/10

  6. Aluminium Radiator  

    Difficult to say what difference this has made, though the normal operating temperature of the water does seem to be 5-6 degrees lower since it was installed which can't be a bad thing.<br /><br />The reason I uprated this was that I'd had the hea · 02/06/10

  7. Mintex 1144 pads  

    These, together with stainless steel braided hoses I had fitted at the same time, made a real improvement to the standard braking performance.<br /><br />Others have said that these are a bit "grabby" - I have found this to a certain extent, whi · 02/06/10

  8. Stainless Steel Braided Hoses  

    Difficult to say what difference this made on its own. I did it at the same time as changing the brake pads to Mintex 1144 front and rear, but the two together certainly made a real improvment to standard braking performace. · 02/06/10

  9. 2bular 8x22 offset silencer  

    This is great. With the ITG induction, this makes for such characterful noise - lotus should have fitted every lotus with this and an induction kit.<br /><br />Great service from Jim Valentine at 2bular with some interesting chat and insight into noise li · 02/06/10

  10. ITG Maxogen  

    This modification makes a surprising difference to the noise produced on "high cam". It gives the car a fanatastic induction noise at full throttle coming up to the "high cam" changeover.<br /><br />Having lived with this for a while n · 13/10/09



×
×
  • Create New...