Jump to content

litp.jpg

Lotus in the Peak
26th - 28th June 2026
S1 Elise Exige
By SeanB, 08/01/07
  • 1,842 views
  1. Quaife 6 speed sequential gearbox  

    Best mod on the car by far. Transforms the drive. It makes the car electric. I have the shortest final drive installed which means about 130mph flat out in 6th. The real bonus is a long 1st (58mph) which actually makes it a useable gear on track. Tight ha · 08/01/07

  2. A048's  

    Awesome tyres!!!!!!!!!!!! · 08/01/07

  3. rose jointed wishbones  

    All of the inner mounting points for the wish bones are rose jointed, plus all of the outers on the rear. The ride seems no more harsh than with Nylatrons, but these actually work and allow the wishbones to freely move up and down. · 08/01/07

  4. Stripped out. AIM dash logger, MOG seats  

    I stripped out everything that wasn't needed. I even took the wiring loom apart and removed all unwanted cables. You would not believe how much crap is in there. All fuses and relays are relocated to the passanger side of the dash. The Emerald is moun · 08/01/07

  5. Erland Airbox and trumpets, K&N Panel Filter  

    Simon ERland Carbon airbox with integral K&N Panel air filter. Its fed via the large sized ducting from the passanger side scoop. · 08/01/07

  6. Cut out bodywork, Motorsport Roof and engine cover  

    I have cut out the froont barke ducts in the clam to let some air in<br /><br />I have also cut out the number plate appature and the fog light and reversing light appatures, all to allow hot air out of the engine bay.<br /><br />Maddog Motorsport roof wi · 08/01/07

  7. Elise parts (Simpson) full system  

    Very good quality exhaust, It all just slides together with nothing holding it and it doesn't even blow when it is cold. Sounds great as well. I have had the rear silencer repacked once, which was done under warranty. The other downside is I think it · 08/01/07

  8. Simon Erland 1,800cc K series  

    I have recently installed a 1.8 litre engfine from Simon Erland.<br /><br />It has a much machined block<br />Chromoduro nicosil liners<br />steel rods<br />forged pistons<br />chromduro, supper spunky piston rings<br />Head is ported as big as possible<b · 08/01/07

  9. Lotus Motorsport Brake kit  

    I have 295 x 28 AP disks all round<br /><br />AP 4 pot callipers on the front<br /><br />Standard front 2 pot callipers on the rear. I modified these so that the fluid flows into the middle of the inside piston housing (like all callipers) I then have two · 08/01/07

  10. Ohlins 46mm 3 way adjustable dampers  

    Supplied and setup by Plans Motorsport. In my opinion these really are the dogs danglies of suspension. Build quality is awesome and you can feel the difference even the slightest adjustment makes. · 08/01/07



×
×
  • Create New...