Jump to content

litp.jpg

Lotus in the Peak
26th - 28th June 2026
Elan M100
By ElanNEL, 19/11/03
  • 2,633 views
  1. Federal Spec 16" Alloys  

    Brilliant Mod, can't believe how different they look. Plus no need for spacers on the front to miss the Calipers! · 19/11/03

  2. Hi-Spec 4 pot Calipers, 275mm Disks, Pagid Fast Road Pads.  

    Excellent Mod. Loads of difference, most of us know how bad they can be, these calipers make all the difference. Best Mod yet! Although I had to go for the 275mm Disks when I purchased the Calipers, I have since bought the Federal Spec Alloys, so whe · 19/11/03

  3. Custom Rear Strut Brace  

    Haven't had a real chance to test this out yet on the track, but it does feel loads better on the road. I know the Elan doesn't have much body roll, but this mod reduces it even more. I made the Brace from material left over from work (1 3/4&quot · 22/11/03

  4. 2.5" Custom Stainless Steel Exhaust  

    This was a good deal as 'Powerflow' had only just started up by me and I happened to be one of their first customers hence the price if I booked the car in that week. It is 2.5" bore from the turbo back. It isn't loud around town, but do · 22/11/03

  5. Hi-Spec Braided Hoses  

    Full set of 6 hoses. · 22/11/03

  6. Pagid Fast Road Pads  

    Fancied a change from the EBC pads I have had before. No fading under heavy braking and still very little brake dust. Definately use again. · 22/11/03

  7. BBR Conversion Kit  

    This was fitted to my car before I bought it. It was done through 'Bell and Colvill'. Since then I have found out lots about this kit and it is well worth doing, but very expensive for what it is. There are many other ways of achieving basically · 22/11/03

  8. Clear Side Indicators  

    Looks good on a Silver car! Kind of smooths out the sides without the orange in there. · 23/11/03

  9. Stainless Steel Rear Wishbones  

    Can't really see this mod, but knowing that it has been done brings peace of mind. Everyone with an Elan knows how bad the wishbones can get. Mine were pretty bad and with the 'plan' to do some track days I needed to know they were strong. Th · 22/11/03

  10. K&N Replacement Air Filter  

    Thought that this would be the better option, as the engine bay is so compact a cone filter may take in too much hot air, so I kept the original Air box and just replaced the filter. You can now hear the suction a little more and it also helps the car to · 22/11/03



×
×
  • Create New...