Jump to content

litp.jpg

Lotus in the Peak
28th - 30th June 2024
  • Welcome to Midlands Lotus Owners Club (MLOC)

    Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more!

    This message will be removed once you have signed in.

Elise Suspension


Ladders

Overview

There are numerous options of springs and dampers (commonly referred to as suspension options) available for Elises. Some of these are available from the factory (such as the red Konis fitted to std S1's, the yellow Lotus Sport Suspension dampers fitted on higher spec variants and the yellow Bilsteins fitted to S2's) and some are from specialist aftermarket manufacturers (e.g. Nitron, Spax, Gaz etc).

 

The spring and damper perform different operations; the spring is there predominantly to support the mass of the car whilst the damper resists movement - the faster the suspension moves the more the damper resists.

 

Most car damper units are single piece and unadjustable, thats to say that the settings are fixed. Obviously this is then a compromise between useage, e.g. smooth racetracks and potholed roads. Higher spec dampers offer adjustment via one or more knobs somewhere on the damper. The adjustments affect the bump and rebound characteristics of the unit. Bump is the resistance to movement as the damper is compressed, e.g. over bumps and racetrack kerbs, whilst rebound is the resistance to the damper uncompressing, usually after a bump. These settings are usually adjusted via knobs or screw adjusters somewhere on the damper. The number of adjusters depends on the type of damper; '1 way', '2 way', '3 way' etc.

 

  • '1 way' units have a single adjuster that adjusts both bump and rebound together
  • '2 way' units have individual adjusters for bump and rebound
  • '3 way' units have individual adjusters for low speed bump movement (e.g. 'normal' road undulations), high speed bump movement (e.g. kerb strike etc) and rebound.

The more complex units units also come in a selection of appearences, with an extra cylinder either 'piggy backed' on the main unit or remotely mounted on a hose.

 

 

Finally, standard road dampers have fixed spring positions, whereas higher spec dampers have moveable platforms that allow rideheights to be adjusted.

 

 

1-way adjustable, single piece dampers with adjustable platforms are the most common choice in higher spec aftermarket dampers and a good cost/performance compromise for road and trackday use. The best combination of spring, damper (make and setting) and ride height depend on useage and driver preference, although there is a lot of advice to be had on the forums.

 

 

Bilsteins

 

Advantages

  • 1 Relativly Cheap
  • 2 Good Peformance for the Money
  • 3 Good Ride Quality
  • 4 Better than the OE fit Koni's
  • 5 Can be set to adjust the ride height
  • 6 Don't have to be declared as a Mod to insurance companies

Disadvantages

  • 1 A bit soft for hardcore track work
  • 2
  • 3

Koni

 

Advantages

  • 1
  • 2
  • 3

Disadvantages

  • 1
  • 2
  • 3

Nitron

 

Advantages

  • 1 Some of the best suspension you can get for the Elise
  • 2
  • 3

Disadvantages

  • 1 Expensive
  • 2
  • 3

Ohlins

 

Advantages

  • 1 Some of the best suspension you can get for the Elise
  • 2
  • 3

Disadvantages

  • 1 Expensive
  • 2
  • 3

To get you started, here are a few settings to try (all counted from "full hard")...

 

Gentle road / wet: -24, -28 Motorway: -20, -25 Fast road (runs): -18, -22 Dry track cold: -13, -18 Dry track hot: - 8, -12 Wet track: -15, -18

 

... although obviously experiment with what suits your driving. In short, for slower & bumpier, the softer it has to be.

 

You can adjust the front-rear bias usefully (relative settings). For damp and/or gusty conditions, soften the front more and it increases "feel" and stability - in effect dialling in a fraction more understeer which is a good for safety in such conditions. Then harden the front for more neutral handling, in effect maximising rear grip for when you can be more brutal with the power through the back wheels.

 

Although there are allegedly 60 clicks on an Ohlins tube, forget about the softest 30 - it makes the car too bouncy.

 

 

Gaz

 

Advantages

  • 1 Cheap
  • 2
  • 3

Disadvantages

  • 1 Not good on Elises
  • 2
  • 3

Avo

180px-AVO.jpg

AVO fully adjustable shock and spring kit, adjustable damping rate, adjustable ride height platforms.

 

 

Advantages

  • 1 Cheap
  • 2
  • 3

<a name="Disadvantages_6" id="Disadvantages_6">

Disadvantages

  • 1 Sound for a budget shock, standard road setting they are fine.
  • 2 As the old adage goes, you get what you pay for
  • 3


User Feedback

Recommended Comments

There are no comments to display.



Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Bilstein Repair Service

    Hi A couple of weeks ago my 2008 Elise failed its MOT due to leaking rear Bilstein dampers. A look on elise parts and they were £330 incl Vat each without the springs, so I decided to look at my options and found out that Bilstein offer a rebuild service. Dropped them of at their service centre in Leicester last Monday, picked them up yesterday. £140 incl vat per damper for new seals, pistons, gas and oil plus a degrease so less than half the cost of new ones. Very good

    Badger02
    Badger02
    Technical Talk 13

    S1 Type 49 Elise Refresh

    And so the winter refresh of my S1 Elise started today. Hoping to take front clam of tomorrow. However of the 4 lower bolts that hold the lower rear to the chassis, 2 are spinning and 2 won't budge despite copious amounts of penetrative oil over the last few months. The Eagle eyed will spot my Dremel tool which I'm not looking forward to using to remove 4 bolt heads that have limited access. Currently on my list are replacing the driving lights brackets, shot blast and paint the tow post, n

    Badger02
    Badger02
    Technical Talk 216

    Tyre Quandry - New Elise

    I went to see a ‘new’ Lotus today. It was bloody lovely. It’s a 15 plate so around 8-9 years old. Fitted to it were Yoko Advans AD07 front and rear. The front ones were 175/55R16 which you can’t get anymore (195/50R16 seems to be the option for fronts). Either way, by my man-maths, the tyres must be as old as the car. The date stamp on one of the fronts and one of the rears was 4814 so made end of Nov ‘14. The previous owner tracked it a lot so I’m assuming he used a 2nd set of wheels/tyres and

    Guido
    Guido
    Technical Talk 28

    Lakes District

    Guys, I am planning a break in the lakes district for a chill drive taking in the views. I am wondering if anyone has driven all the popular passes in an S2 Exige? Any I should skip for sure? Cheers

    Pete_72
    Pete_72
    Touring 15

    S3 Elise Brakes

    Since owning my Elise 240 Final Edition I've felt that the brakes weren't the best. Seemed to lack initial bite and lacked "feel" through the pedal. Over the past few weeks I've had 2 occasions when driving in the rain where I've gone to brake and found there to be very little there, had to press the pedal a few times and wondered whether I was going to stop in time - not a comfortable feeling. As I'd never been keen on the feel of the brakes I always planned to change the pads at some poin

    Trebor_UK
    Trebor_UK
    Technical Talk 5
  • MLOC classifieds

  • MLOC garage

  • Member Statistics

    4,222
    Total Members
    1,800
    Most Online
    Colgy
    Newest Member
    Colgy
    Joined
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use