LIVY Posted January 11, 2004 Share Posted January 11, 2004 Hi All, I'm a new member/elise Mk1 owner. (Bought as a sneeky Christmas present to me). Missus not best pleased especially as she is too small to reach the pedals. Ha Ha. Anyway she has bought me some shiny bits for Christmas inc. Alloy Door pins which should look great bought after taking the door card off I can't fathom out how to fix them. There are no instructions. The pins are actually allen bolts attached to a rubberised rawl plug with a nut inside the rawl. I thought I could push them into the holes in the door and they would be secure but they are too wide and I don't want to be having to widen the holes in the door with a file. Anyway thought sod it and went out for a drive. Hour Later and I'm back posting this messgae with a stupid grin on my face. (Elise ownership Eh...... ) If anyone has fitted these or has any ideas it would be a great help. Ta very much Mark (LIVY) Link to comment Share on other sites More sharing options...
malbon Posted January 11, 2004 Share Posted January 11, 2004 you need to drill the holes to widen them. Search the BC BBS archives to find out the correct size. It sounds bloody awful drilling through fibre glass but needs must. Link to comment Share on other sites More sharing options...
malbon Posted January 11, 2004 Share Posted January 11, 2004 Just having a look at your profile. Alloy Gear Gate...Alloy Door Pins..... then Roll Cage....Harnesses What are you ? A GJOB or a track star ? Make your mind up Link to comment Share on other sites More sharing options...
Mark H Posted January 11, 2004 Share Posted January 11, 2004 Pretty sure I used an 8mm drill bit on mine, here is a fitting guide: Clicky Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.