crinkle Posted April 5, 2022 Share Posted April 5, 2022 I need to replace the O rings on the sandwich plates and I have been looking at the rubber type mounting kit as opposed to the Thackray washers .Can anyone give me any tips on fitting these ? Regards Link to comment Share on other sites More sharing options...
Broadside Posted April 5, 2022 Share Posted April 5, 2022 Tighten them up evenly until you have an equal gap between the cup washers on all of them, I usually work to about .010" or 015" just be sure they are not bound up solid Link to comment Share on other sites More sharing options...
crinkle Posted April 6, 2022 Author Share Posted April 6, 2022 17 hours ago, Broadside said: Tighten them up evenly until you have an equal gap between the cup washers on all of them, I usually work to about .010" or 015" just be sure they are not bound up solid Much obliged . Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.