richbk Posted January 31, 2022 Share Posted January 31, 2022 I expected the t'interweb to be full of guides, how to's, how not to's , a couple of Belgian you tube videos and probably a tik tok of how to safely, securely and with clear descriptions and pointers to remove an S1 elise clam. But i am struggling. Seloc seems to have an S2 clam removal wiki and cant see an obvious 1 on here. Could the good people of Mloc help? As an S2 Exige owner i an obviously "asking for a friend :)" Link to comment Share on other sites More sharing options...
Phil S1 Posted January 31, 2022 Share Posted January 31, 2022 It's a job I did quite some time ago now Rich, don't know whether this will be of any help to you... https://www.midlandslotus.co.uk/forum/topic/63887-radiator-upgrade-and-all-that-goes-with-it/ And there is of course Dave's extensive overhaul of his S1... https://www.midlandslotus.co.uk/forum/topic/67892-the-mustard-yellow-elise-s1-refresh-thread/ Link to comment Share on other sites More sharing options...
richbk Posted February 2, 2022 Author Share Posted February 2, 2022 Cheers Phil . I am sure we will work it out , it’s the position of each fixing I was hoping to learn , will find the on line manual hopefully to work along side the threads . rich Link to comment Share on other sites More sharing options...
Phil S1 Posted February 2, 2022 Share Posted February 2, 2022 There aren't that many fixings Rich, just be wary of all the spacer washers. It's the two bolts each side down into the sills that can be a pain if they have seized and the captive nuts start spinning. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.