Recling driver seat s2

[Mrker60]

Hi.I would like to recline my seat .

If i get the seat in the best clutch posistion I feel like i,'m sat up strate.

It would be perfect if i could recline a bit any options maybe longer bolts with some spacers at front ?

If i got the ideal position i could get a mate to cnc 2 spacers with a slope to them ?

[JsExige]

I also want to do this. My drivers seat is on sliding rails which I like. I’d just like to raise the front 10mm or so.  I think nylon spacers/washers might do the trick. 

[Daveb99]

Spacers will work.  I used 5mm spacers at the front recently so that the mechanism clears my carpets when sliding the seat forward.

[Mrker60]

Cheers.did 5 mm recline the seat a lot.

What spacers did you use ?

Thanks mate

[Daveb99]

14 hours ago, Mrker60 said:

Cheers.did 5 mm recline the seat a lot.

What spacers did you use ?

Thanks mate

No, hardly at all, I just used them to add a bit of height at the front so the runners clear the carpets.   They were just M8 ally spacers.

I think it’s already quite a reclined seat angle as standard, are you sure you really need to change it?

[Mrker60]

Yes .if i sit in a good position for the clutch.

My arms are like i'm hugging a barrel.

I'v put spacers in today loads better wish seat reclined though