Gazlar53 Posted February 17, 2019 Share Posted February 17, 2019 Hi, as per title. Just putting this back together, do I need to put duraline on the back of the disks where they touch the drive flanges? there seems to be evidence of some there previously but the mating face of the disk looks like it might be steel... thanks, gareth Link to comment Share on other sites More sharing options...
Beachbugy Posted February 21, 2019 Share Posted February 21, 2019 You can do but a very thin smeer , in reality the galvanic corrosion of the 2 materials isn’t that much of a problem unlike stainless and copper , as the Mmc disks have some aluminium in them you do get some corrosion but by the time you have worn them out that won’t be a problem as you can’t replace them and they won’t hurt the drive flanges anyway , as the disks will be the sacrificial anode as it wer , hope this helps Scott Link to comment Share on other sites More sharing options...
Lithopsian Posted February 21, 2019 Share Posted February 21, 2019 Duraline? Duralac? Link to comment Share on other sites More sharing options...
Gazlar53 Posted February 22, 2019 Author Share Posted February 22, 2019 Thanks guys, much appreciated. Yes I meant Duralac Link to comment Share on other sites More sharing options...
MrWill Posted February 22, 2019 Share Posted February 22, 2019 No sign of duralac (or copper-ease etc) according to Lotus; they do insist the mating surfaces need to be "scrupulously clean" 😷 time to get the marigolds on... Link to comment Share on other sites More sharing options...
Gazlar53 Posted February 23, 2019 Author Share Posted February 23, 2019 Ha ha, thanks for checking that. They’ve scrubbed up ok 👍 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.