s2john Posted February 3, 2019 Share Posted February 3, 2019 Great looking car, keep up the good work 😎 Link to comment Share on other sites More sharing options...
kieranexige Posted February 22, 2019 Author Share Posted February 22, 2019 I really must get back to getting this car sorted. I finally managed to get the interior done at last. The seat frames took some real modifications to clear the gear surround and I also some of the new lotus anti Rock spring steel shims (which work). I had to strip the runner down, clean and re grease to get a nice movement but I was still 2mm to far over to the passenger side. Instead of slackening the bolts holding the gear leaver mech and seeing what we had to play with I took one of the seatbelt spacers out and machined a new one 2mm shorter , still retaining the 45 degree internal chamfer that the shoulder bolt locks against. Hey presto job done. Spitfires, pro alloy bits, sports cat and a full service next. Oh the joy. Link to comment Share on other sites More sharing options...
jonnyfox Posted February 23, 2019 Share Posted February 23, 2019 Looking good buddy Link to comment Share on other sites More sharing options...
Martin R Posted February 27, 2019 Share Posted February 27, 2019 Good work, the lathe needs a good clean HTH Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.