chris_h Posted March 20, 2014 Share Posted March 20, 2014 Rear had quite a bit more than front, I believe they had about the maximum without machining. Sorry don't have the exact details anymore as it was with all the documents that went with the new owner. Link to comment Share on other sites More sharing options...
C1RVY Posted March 20, 2014 Author Share Posted March 20, 2014 Rear had quite a bit more than front, I believe they had about the maximum without machining. Sorry don't have the exact details anymore as it was with all the documents that went with the new owner. Cheers Chris, all tips gratefully received. Link to comment Share on other sites More sharing options...
winthattt Posted March 20, 2014 Share Posted March 20, 2014 I would let Michael set it up, he appears to know what he is going. I asked for standard ride height as I have some nasty speed bumps and a predictable track car that is not twitchy on the road. It is set at 130 ride height Front has 1 degree nc, rear is 2 degrees nc 1mm toe out on front, 1mm toe in on rear. Cross balance is 51% allowing for my 75kg. Cannot try it at Snetterton tomorrow, a Bedford early next month. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.