Midlands Lotus Owners Club (MLOC)

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more!

This message will be removed once you have signed in.

Archived

This topic is now archived and is closed to further replies.

MrSimba

Big Power For The Lego Brick!

124 posts in this topic

dsc_0979_med.jpeg

 

Subframe now in place.

 

 

The timing wheel on the crank and failed bolts that fasten it to the crank. A new toothed wheel and fasteners were used.

 

dsc_0981_med.jpeg

 

dsc_0983_med.jpeg

 

Wishbones etc shot blasted and ready for painting

 

Standard engine loom removed, I made a new custom loom that plugs into the OE loom.

 

dsc_0978_med.jpeg

 

I also moved the relays and fuses from the boot into the cockpit to facilitate removal of the rear clam in future.

Also shown is the Adaptronic standalone ECU

 

dsc_0985_med.jpeg

 

 

dsc_0986_med.jpeg

 

I made a swirl pot to feed the high pressure pump (Bosch 044)

dsc_0984_med.jpeg

 

I fitted a Quaife ATB Diff to the box to aid traction.

 

dsc_0987_med.jpeg

 

Suspension refitted having been refurbished.

 

dsc_0989_med.jpeg

 

Dave

0

Share this post


Link to post
Share on other sites

Certainly does look good Dave, well done. I catch up with Simon from time to time too. Post up more pics mate as when you get time ;-)

0

Share this post


Link to post
Share on other sites

Just had a good look at the power curves and its pretty much the same as my T series with the same GTX2867 so i am happy

 

402bhp at 23psi

 

But i also have the flat power curve from 6k to 7k

 

Very happy with my turbo spools quick ish, but does come on strong at 3000 - 3500 rpm

0

Share this post


Link to post
Share on other sites