Quite straight forward
Get the front up on axle stands and remove wheels, arch liners, lights.
Remove front under tray
Remove inspection panel
Remove all bolts under the inspection panel, under lights and at the bottom of the front wheel arch
Then remove bolts from inside front clam wheel arch to lower bottom wing trim ( watch out for shims)
Now either side of car open door and loosen bolt holding clam to bottom wing trim. this doesn't have to be fully removed just loose and watch for shims
Last bolt is under the bracket screwed to the clam this needs to be removed.
The clam can now be lifted but disconnect the ariel lead and the upper trim panel push switch.
