jako999 Posted April 15, 2015 Share Posted April 15, 2015 Hi all the rear under tray lets my car down as there is corrosion around the rivites I dont think the previous owner could have looked after them very well. Has anyone sprayed the alloy tray if so is it hard and is there anythig special I should know also its a burnt orange car so should I stay silver or go black? Thanks in advance Link to comment Share on other sites More sharing options...
kieranexige Posted April 15, 2015 Share Posted April 15, 2015 Hi Jako, I had mine done over the winter as I had the same problem. I took it to my local powder coaters and had it blasted and re painted in black. £30 job done. Link to comment Share on other sites More sharing options...
Dennis Posted April 15, 2015 Share Posted April 15, 2015 I am about to turn mine black/dark grey Link to comment Share on other sites More sharing options...
Martin R Posted April 15, 2015 Share Posted April 15, 2015 Hi all the rear under tray lets my car down as there is corrosion around the rivites I dont think the previous owner could have looked after them very well. Has anyone sprayed the alloy tray if so is it hard and is there anythig special I should know also its a burnt orange car so should I stay silver or go black? Thanks in advance There are a couple of powder coaters in Redditch. Dan Webster will point you in the right direction Link to comment Share on other sites More sharing options...
jako999 Posted April 15, 2015 Author Share Posted April 15, 2015 Thanks i will look into it Link to comment Share on other sites More sharing options...
fentuz Posted April 18, 2015 Share Posted April 18, 2015 Brushed mine 4/5yrs ago with wirebrush, sprayed alu primer and a couple of coats of por5 black. It's still ok. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.