AdamJ Posted April 12, 2015 Share Posted April 12, 2015 If developed an annoying little rattle which seems to be caused by engine/exhaust resonance at certain revs. It happens between about 3500 and 5000 rpm. I think it's coming from behind the black plastic bulkhead cover behind the seats. Does anyone know if there's anything behind the cover that's likely to rattle? Also what holds it on as I'm probably going to remove it to take a look, which I guess is going to involve removing the roof and then the seats before I can get to it. Link to comment Share on other sites More sharing options...
The Cakes Posted April 12, 2015 Share Posted April 12, 2015 Could be your rear window, I had an Exige with a similar noise. They are prone to come unstuck. Link to comment Share on other sites More sharing options...
Martin R Posted April 12, 2015 Share Posted April 12, 2015 Make sure none of the exhaust heat shields are loose. Link to comment Share on other sites More sharing options...
AdamJ Posted April 12, 2015 Author Share Posted April 12, 2015 Thanks guys, I'll check both Link to comment Share on other sites More sharing options...
Legacystorm Posted April 12, 2015 Share Posted April 12, 2015 Also on exhaust there is bracket from tail pipes to main exhaust body these are common to crack and vibrate and rattle. Jon Link to comment Share on other sites More sharing options...
chris_h Posted April 12, 2015 Share Posted April 12, 2015 U bend heat shield between cat and exhaust is common source of rattles Link to comment Share on other sites More sharing options...
Meister Posted April 12, 2015 Share Posted April 12, 2015 Really interesting this, I have been in 2 or 3 Exiges which have had some resonance/tizzing at exactly 4,000rpm?! I look forward to the suggestions on what potentially causes this. Link to comment Share on other sites More sharing options...
G Posted April 12, 2015 Share Posted April 12, 2015 I had the rattle as Jon says Link to comment Share on other sites More sharing options...
chris_h Posted April 12, 2015 Share Posted April 12, 2015 Yep I had the same bit welded up on my old exige Link to comment Share on other sites More sharing options...
Dennis Posted April 12, 2015 Share Posted April 12, 2015 Reminds me of the anti-tizzy brackets on the S1 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.