P4N Lotus Posted March 22, 2015 Share Posted March 22, 2015 Anyone with an Evora, I've recently installed a new rear diffuser and I'm trying to work out the difference in clearance of degree slope standard vs difflow. You'll need to measure with something flat and long, hold at an angle until it touches the factory diffuser take that length. Then take measurements vertical from the point touches going down. Wanting to work out what if any degree slope I've lost. With new difflow I'm now at 12.5 degrees angle slope Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.