kieranexige Posted August 3, 2014 Share Posted August 3, 2014 Hi all, The exige is needing a full set of discs / pads for its next mot so I've been looking around. Thinking of going 308mm on the front with caliper spacers but not sure on the rears. I was going to stick the elise parts belled set on but I've just found these below. The elise parts say 200bhp max bit these don't so i was looking to see if anyone knew anymore before I give them a call. http://www.seriouslylotus.com/braking/s2-alloy-belled-brake-discs Cheers Kieran Link to comment Share on other sites More sharing options...
stockhome Posted August 4, 2014 Share Posted August 4, 2014 I have not tried them but I do have the eliseparts ones.The eliseparts are not handed. You end up with one of the disks internal cooling veins backwards. I have read these are properly handed. Link to comment Share on other sites More sharing options...
darryl Posted August 4, 2014 Share Posted August 4, 2014 Surprised they are only 300g lighter than all steel Link to comment Share on other sites More sharing options...
kieranexige Posted August 4, 2014 Author Share Posted August 4, 2014 Yeah that's what I thought but then thought it cant be right ....can it? I've emailed them anyway. Darryl I've still got to email you over my details from the insurance raffle prize, sorry I havnt got round to it Straight away. Kieran Link to comment Share on other sites More sharing options...
rocketian Posted August 4, 2014 Share Posted August 4, 2014 Taking of disks - how do I tell when my disks need replacing ?? Link to comment Share on other sites More sharing options...
jonnyfox Posted August 4, 2014 Share Posted August 4, 2014 Call Dave , he's a top man, excellent service, I use him all the time. He posts on exiges.com Link to comment Share on other sites More sharing options...
kieranexige Posted August 4, 2014 Author Share Posted August 4, 2014 Call Dave , he's a top man, excellent service, I use him all the time. He posts on exiges.com Cheers will do , is Dave at Seriously lotus then? Do you know his username on Exiges.com Cheers Kieran Link to comment Share on other sites More sharing options...
jonnyfox Posted August 4, 2014 Share Posted August 4, 2014 Yep as per Co. name on exiges :-) Link to comment Share on other sites More sharing options...
kieranexige Posted August 4, 2014 Author Share Posted August 4, 2014 Yep as per Co. name on exiges :-) Super stuff. Cheers Link to comment Share on other sites More sharing options...
Martin 111S Posted August 4, 2014 Share Posted August 4, 2014 Nothing about the discs in question, but Dave is a top bloke and knows his stuff. On a side note guess who's the car is on their homepage Link to comment Share on other sites More sharing options...
Reg Posted August 4, 2014 Share Posted August 4, 2014 Taking of disks - how do I tell when my disks need replacing ?? There's a minimum thickness (measurement is usually stamped on somewhere). Link to comment Share on other sites More sharing options...
darryl Posted August 4, 2014 Share Posted August 4, 2014 Yeah that's what I thought but then thought it cant be right ....can it? I've emailed them anyway. Darryl I've still got to email you over my details from the insurance raffle prize, sorry I havnt got round to it Straight away. Kieran Kieran any time tbh, Matthew is pretty easy to chat to Link to comment Share on other sites More sharing options...
Steve J Posted August 10, 2014 Share Posted August 10, 2014 I think the min disc thickness is 26mm but I'm a few miles away from my ref material. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.