Piper 1320 Grind

[Alex B]

does anyone have an info on piper's 1320 grind cams?
after duration etc.
also any fettling required for fitting to a vvc head? (they are vvc solid cams)

[Martin R]

Alex, 1320 cams 268 degrees and 10.9mm lift. AFAIK no fettling required. I think you only need the fettling on 1444.

[Alex B]

Alex, 1320 cams 268 degrees and 10.9mm lift. AFAIK no fettling required. I think you only need the fettling on 1444.

cheers for the info as always martin

 

i couldn't remember if it was 10.5 or 11mm lift that you can get away with without some small alterations to the head.

[Martin R]

Email DVA to be sure. Also make sure you have the correct springs. I have no idea if you need uprated ones?

[Alex B]

yeah will give dave a buzz in the morning, theres a set of unused ones on ebay.
hence looking into whats needed to to fit em.

[fentuz]

http://www.midlandslotus.co.uk/forum/topic/63030-solid-cam-conversions/#entry265587

[Alex B]

http://www.midlandslotus.co.uk/forum/topic/63030-solid-cam-conversions/#entry265587

Cheers bill I knew someone had mentioned em just couldn't find it.

The 1320's could be the answer to my current VVC woes.

[fentuz]

careful, the ITB kit desire will become very strong... Several people started with simple solid cam conversion and ended with tune VHPD type engine...