Jamie Triner Posted May 28, 2014 Share Posted May 28, 2014 Hi there, I don't know if this has been covered but I've had to post as been losing my indicators while out driving. I have a s2 elise, just had a new alarm and imboliser fitted. A week later the indicates kept failing. I read that it could be a loose connection to the hazard button. So I've checked it and made sure the connection is tight. Today the same us happening and lose both hazard lights and indicator? Seems to work and then doesn't while driving, very intermittent. Anyone got any ideas? Thanks Link to comment Share on other sites More sharing options...
Steve J Posted May 28, 2014 Share Posted May 28, 2014 One of the silver square relays gone? Link to comment Share on other sites More sharing options...
@ndy Posted May 30, 2014 Share Posted May 30, 2014 I had exactly the same problem you describe on my S1, Turned out to be the hazard switch which is common on the S1, Not sure if the same problem effects the S2 as the hazard switch is not the same. Link to comment Share on other sites More sharing options...
chrislane Posted May 31, 2014 Share Posted May 31, 2014 I had this on my s2. Again it turned out to be the hazard switch. Link to comment Share on other sites More sharing options...
Meister Posted May 31, 2014 Share Posted May 31, 2014 I too had exactly this problem. I was told by Bell & Colvill that this was a very common problem caused by the hazard switch. Mark Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.