Acehole Posted December 2, 2013 Share Posted December 2, 2013 Hi all, i think the TPS has gone or on its way out anyway, when i reset it is ok for a while, idles correctly after a short time revs start to fluctuate, doesnt cut out just drops and picks up. any ideas on cost to replace? Then re furbing the alloys. then i am selling up. new commitments regards acehole Link to comment Share on other sites More sharing options...
John FISH Curtis Posted December 2, 2013 Share Posted December 2, 2013 I think i have one connected to a TB. Your more than welcome to try it. Link to comment Share on other sites More sharing options...
Acehole Posted December 2, 2013 Author Share Posted December 2, 2013 hello, thanks for the kind offer, what is involved with changing them? i'm not a spanner with a spanner so will have a stab, as long as not to complicated or i risk damaging anything else whilst swapping it. so if not that tricky i will take you up on the offer and give it a try. what is the best way for me to collect it from you. thanks acehole Link to comment Share on other sites More sharing options...
stockhome Posted December 2, 2013 Share Posted December 2, 2013 Very easy two bolts. But I think they are torx fittings Link to comment Share on other sites More sharing options...
John FISH Curtis Posted December 2, 2013 Share Posted December 2, 2013 Will check it is in the garage now. I'm in Kirkby in Ashfield, I'll swap it for you this Saturday. Link to comment Share on other sites More sharing options...
John FISH Curtis Posted December 2, 2013 Share Posted December 2, 2013 TPS and idle control valve in the garage, so we could try the TPS first, then the idle control valve if needed to sort the problem. Let me know if you can make it Saturday. Link to comment Share on other sites More sharing options...
Acehole Posted December 2, 2013 Author Share Posted December 2, 2013 Hello, Saturday fine if you are available, appreciate your help Let me know what time and an address and I will be there. Thanks Acehole Link to comment Share on other sites More sharing options...
Chris_edeson Posted December 2, 2013 Share Posted December 2, 2013 Fish you are my hero Link to comment Share on other sites More sharing options...
John FISH Curtis Posted December 2, 2013 Share Posted December 2, 2013 Private Message sent Link to comment Share on other sites More sharing options...
Acehole Posted December 10, 2013 Author Share Posted December 10, 2013 Big thank you to Mr Fish, looks like the TPS has done the trick. will run for a few more days to make sure but at the moment the bag of nails is ticking over nicely. don't suppose you could refurb the wheels next !!! thanks again Acehole Link to comment Share on other sites More sharing options...
John FISH Curtis Posted December 10, 2013 Share Posted December 10, 2013 Glad she's running better, let me know how it goes. Hopefully you wont sell the S2 now.......... you do know you'll want another one is 6 months and you've spent so much on it recently their's no point in selling it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.