S1 Alarm Won't Disarm
Posted 15 July 2013 - 04:59 PM
Posted 08 September 2013 - 08:09 PM
I also had problems repeatly with the alarm. It is possible to fix, sometimes with new parts, sometimes with abit of mending, I have used a registered Cobra company in Hockley in the past, but eventually i decided to remove the old alarm and fit a replacement which could do all that the existing could do and more. You make your choice, but as a temporary fix you can get a alarm by pass fix from eliseparts, or at least you could. I just got a piece of wire and joined two of the pin outs. I then removed all the old alarm and replaced with a new imobilising unit.
Im in America for another week or so but can then be of more help once back in Bromsgrove.
I have found when dealing with any alarm company/garage that you dont know that well, dont give your home address, try to use a third party address of your other half etc ie work address etc, this was after years ago a friend had an alarm fitted and a week later the car was taken from outside the house one evening. The car was quickly recovered, the police arrested someone who worked at the alarm company, but it just makes you think
Anyway hope its not still causing you problems
Posted 08 September 2013 - 09:52 PM
Welcome to MLOC. Impressive first post. I have also used the Cobra specialist in Hockley and they are very good.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users