Dr H Posted February 9, 2013 Posted February 9, 2013 Hi all I need to use a 50mm hole drill to enlarge the holes in my engine mounts (Honda). I have the hole drill bit but really need a pillar drill and decent vice to do it propoerly. Don't suppose there is anyone near to me (Ashby/Burton/Loughborough) who hads one I could come and use? It's about 2mm thick steel so shouldn't take long at all to do the pair. Cheers
IAN G Posted February 9, 2013 Posted February 9, 2013 Theres a place called dowel engineering on that dirty little industrial estate half way down wash lane , just round the corner from you , go in there ask for graham , he should be able to help you out
Dr H Posted February 10, 2013 Author Posted February 10, 2013 Cheers guys, I'll see what I can get sorted.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.