120 replies to this topic

[jonnyfox]

In fairness it hasn't for some time but its about to change big time from what you might have seen at Chatsworth.  So as its quiet here and on exiges right now I thought I bung up a few pictures....
































John from JSRacing popped over for the engine removal


















Seem to have run out of image uploading room!

Edited by jonnyfox, 13 December 2012 - 06:36 PM.

[chris_h]

Looking good Jonny.

When you took the front mounts for the oil coolers off, have you added other mounting points for the front clam.  I'm sure that the clam rested on them and a bolt from the bottom of the headlight enclosure goes into the GRP bits off the side of the front crash box.

Are you leaving the carbon doors unpainted?

Chris

[jonnyfox]

I'm not sure I can post anymore pics to show you but the bottom of the clam is mounted to the splitter.  6 bolts across the top of the clam, 4 across the bottom, the two side aero catch 3's and (not yet) auto marine plugs separating the headlight and indicator wires.

The splitter is bolted to the crash structure along with those 4 stays two coming off each side and one each side again under the radiator.

The doors yea I just can't paint them.  Lambo grey and Kawascatty Green......maybe :-)

Meanwhile at Track-Club http://www.track-group.com/club.html

Edited by jonnyfox, 13 December 2012 - 08:00 PM.

[chris_h]

That's ok and makes sense making the splitter structual.

I'm sure you'd like carbon clams to match the doors, but they seem mega money.

[scatty]

I don't understand anything you have posted, but I know it will be fabulous!!!!!

I do love how you stick to your n/a values! Roll on the new year I say!!! Kawascatty, ha ha!!!!

[jonnyfox]

 chris_h, on 13 December 2012 - 06:05 PM, said:

That's ok and makes sense making the splitter structual.

I'm sure you'd like carbon clams to match the doors, but they seem mega money.

One out of two was best I could do :-)

[jonnyfox]

Gave my interior another go, better with alcantara, fitted AIM MXL dash with gearbox, oil temp sensors and pressure.

[Martin R]

Jon, you dont do things by half do you      Interesting the little cut outs on the engine firering area. This is to allow for the valves to clear i presume? What are you expecting the engine to produce?

[MattBancroft]

reminds me of nasa lunar lander with all that lovely gold foil :-)

[jonnyfox]

Always learning Martin, cheers mate.

I'm going to be realistic and say 220bhp with a 9k rev limit. The compression has risen to 12.5. It'll be on a bench dyno in January, I can't wait!  Should be fitted by mid Feb with a little more work to do.

 MattBancroft, on 13 December 2012 - 08:04 PM, said:

reminds me of nasa lunar lander with all that lovely gold foil :-)

I know, I do like a little bit of bling :-)

[Martin R]

9K rev limited. That should make a wonderful noise. Do me a favour a put some DTHTB on it eventually. Now that would sound special  

[jonnyfox]

Nope I've gone for one of these.......





I'm kind of going for the tried and tested route, well on Celicas and MR2

http://m.youtube.com...h?v=LY1vLVAq6cc

Edited by jonnyfox, 13 December 2012 - 09:27 PM.

[Harmy2010]

Wowza, Thats going to be special. good luck

[jonnyfox]

Cheers Harmy

[MrSimba]

Bloody hell Jonny thought you'd been a bit quiet lately!!!

Awesome stuff going on there

Will have to pop over to see it when you get the engine back!!!